BXJXH - ACETONE, 9006
- MSDS: BXJXH
- Manufacturer: J T BAKER INC
- Product Name: ACETONE, 9006
- National Stock Number: 6810-01-061-3409
Product Identification
Product ID:ACETONE, 9006
MSDS Date:08/27/1986
FSC:6810
NIIN:01-061-3409
MSDS Number: BXJXH
Responsible Party
PHILLIPSBURG, NJ 08865
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 908-859-2151
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
ACETONE (SARA 313) (CERCLA)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 90-100%
OSHA PEL 1000 PPM
ACGIH TLV: 750PPM/1000STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT): 9750 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: VAPS MAY BE IRRIT TO SKIN,
EYES, NOSE & THROAT. INHAL OF VAPS MAY CAUSE NAUS, VOMIT, HDCH/LOSS
OF CONSCIOUSNESS. LIQ MAY CAUSE PERM EYE DMG. CONT W/SKIN HAS A
DEFAT EFT, CAUSING DRYING & IRRIT. INGEST MAY CAUSE NAUS, VOMIT,
HDCH, DIZZ, GI IRRIT. CHRONIC: MAY INCLUDE KIDNEY AND/OR LIVER
DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:CALL MD. INGEST: IF SWALLOWED, IF CONSCIOUS, IMMEDIATELY
INDUCE VOMITING. INHAL: REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE
ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN.
EYES: IMMED IATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES. SKIN: FLUSH WITH WATER.
Fire Fighting
Flash Point Method:CC
Flash Point:-0F,-18C
Lower Limits:2.6%
Upper Limits:13.0%
Extinguishing Media:ALCOHOL FOAM, DRY CHEMICAL OR CARBON DIOXIDE. WATER
MAY BE INEFFECTIVE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. MOVE CONTRS FROM FIRE AREA IF IT CAN BE DONE W/OUT RISK. USE
WATER TO KEEP FIRE-EXPOSED CONTRS COOL.
Unusual Fire/Explosion Hazard:VAPORS MAY FLOW ALONG SURFACES TO DISTANT
IGNITION SOURCES & FLASH BACK. CLOSED CONTRS EXPOSED TO HEAT MAY
EXPLODE. CONTACT W/STRONG OXIDIZERS MAY CAUSE FIRE.
Accidental Release
Spill Release Procedures:WEAR SUITABLE PROT CLTHG. SHUT OFF IGNIT
SOURCES. NO FLARES, SMKNG/FLAMES IN AREA. STOP LEAK IF YOU CAN DO
SO W/OUT RISK. USE WATER SPRAY TO REDUCE VAPS. TAKE UP W/SAND/OTHER
NON-COMBUST ABSORB MATL & PLACE INTO CONTR FOR LATER DISP.
FLUSH(SUP DAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:BOND & GROUND CONTAINERS WHEN
TRANSFERRING LIQUID. KEEP CONTAINER TIGHTLY CLOSED. STORE IN COOL,
DRY, WELL-VENTILATED, FLAMMABLE LIQUID STORAGE AREA.
Other Precautions:DANGER! CAUSES IRRITATION. EXTREMELY FLAMMABLE.
HARMFUL IF SWALLOWED OR INHALED. KEEP AWAY FROM HEAT, SPARKS,
FLAMES. AVOID CONTACT WITH EYES, SKIN, OR CLOTHING. AVOID BREATHING
VAPORS.
Exposure Controls
Respiratory Protection:RESP PROT REQUIRED IF AIRBORNE CONC EXCEEDS TLV.
AT CONS UP TO 5000PPM, A NIOSH/MSHA APPRVD GAS MASK W/ORG VAP
CANNISTER IS REC. ABOVE THIS LEVEL, A NIOSH/MSHA APPRVD SCBA W/FULL
FACE SHIELD IS ADVISE D.
Ventilation:USE GENERAL OR LOCAL EXHAUST VENTILATION TO MEET TLV
REQUIREMENTS.
Protective Gloves:BUTYL RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS (SUPP DAT)
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . LAB COAT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
MATLS TO AVOID: CHLORINE CMPDS, STRONG ACIDS, ESP. SULFURIC, NITRIC,
HYDROCHLORIC. SPILL PROC: AREA WITH WATER. JT BAKER SOLUSORB(R)
SOLVENT ABSORBENT IS RECOMMENDED FOR SPILLS OF THIS PRODUCT. EYE P
ROT:GOGGLES WITH FULL LENGTH FACESHIELD.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:133F,56C
Melt/Freeze Pt:M.P/F.P Text:-139F,-95C
Vapor Pres:181
Vapor Density:2.0
Spec Gravity:0.79 (H*2O=1)
Evaporation Rate & Reference:10 (BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS LIQUID WITH A FRAGRANT SWEET ODOR
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
HALOGEN ACIDS & HALOGEN CMPDS, STRONG BASES, STRONG OXIDIZING AGENTS,
CAUSTICS, AMINES & AMMONIA, CHLORINE & (SUP DAT)
Stability Condition to Avoid:HEAT, FLAME, SOURCES OF IGNITION.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL ENVIRONMENTAL REGULATIONS. EPA HAZ WASTE NUMBER: U002
(TOXIC WASTE).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.